TST Series
Surge Protection
Device
SURGE PROTECTION DEVICES FOR
SERIES/PARALLEL APPLICATIONS
USER MANUAL AND
INSTALLATION GUIDE
WARRANTY INFORMATION
Meter-Treater, Inc. (MTI) warrants all TST Series models
to be free from defects, and will at our option repair or
replace the product should it fail within fifteen (15)
years from the first date of shipment. This warranty is
limited to defects in workmanship or materials, and does
not cover customer damage, abuse or unauthorized
modification. If this product fails or does not perform as
specified, your sole recourse shall be repair or
replacement as described above. Under no condition
shall MTI be liable for any damages incurred by the use
of this product. Damages include, but are not limited to,
the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability
to use this product. MTI specifically disclaims all other
warranties, expressed or implied, and the installation or
use of this product shall be deemed an acceptance of
these terms by the user.
WARRANTY RETURNS
All warranty and non-warranty repairs must be returned
freight prepaid and insured to MTI. All returns must have
a Return Authorization (RA) number on the outside of the
shipping container. This number may be obtained from MTI
Warranty Department (800) 342-6890. Products returned
without an RA number will not be accepted.
IF UNIT(S) ARE RECEIVED DAMAGED,
NOTIFY THE SHIPPING COMPANY
IMMEDIATELY. RETAIN ALL SHIPPING
CONTAINERS AND PACKING MATERIALS FOR
INSPECTION.
Meter-Treater, Inc.
1349 South Killian Drive • Lake Park, FL 33403
Phone: 561.845.2007 • Fax: 561.848.2372
Email: [email protected]
Website: www.metertreater.com
Please Note:
There are no user serviceable parts inside.
MT-TSTINSTALL-42017
GENERAL
1. This document provides detailed information on how
to install and operate the TST Series of Surge Protection
Devices (SPD).
2. Incorrect installation may significantly impair the
performance of the SPD. It is particularly important that all
installation procedures and guidelines be followed exactly.
3. INSTALLATION OF THIS SPD SHOULD ONLY BE
PERFORMED BY A QUALIFIED INSTALLER
4. CHECK TO ENSURE THAT ALL CONNECTIONS ARE
CORRECT AND SECURE BEFORE ENERGIZING.
5. KEEP THIS MANUAL IN A SAFE, DRY PLACE FOR
FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
NOTICE: All instructions and measurements must be
completed by a qualified electrician in accordance with
the National Electric Code and/or other applicable state
and local codes. The U.S. National Electric Code
and/or applicable state/local requirements supersede
these instructions.
CAUTION: HAZARDOUS VOLTAGES
PRESENT
Improper installation or misapplication of these SPD’s
may result in serious injury to the installer and/or damage
to electrical system(s) or related equipment. Read and
understand all instructions before commencing with the
installation. Appropriate personal protective equipment
should be worn during the installation process.
COMMERCIAL INSTALLATIONS