18
MT-550
To Exit All Scan:
•
Press the
SCAN
key or press the
16
key.
To delete channels from the scan sequence:
•
Push and hold the
SELECT/ENT
knob while the scan is halted on the
offending channel. Turning the transceiver Off and On, restores all channels
to the scan sequence.
Memory Scan
Memory Scan allows the user to create and scan a bank of preferred channels.
Channels may be added to or removed from the memory channel bank as desired.
Memory channels are stored individually and may be deleted individually, or the
entire bank may be deleted. If the
PTT
button is pressed, the transceiver exits
scanning and normal communication is resumed.
To create or add channels to the memory channel bank:
•
Press the
MEM
key. The Memory Scan channel bank appears in lower two
lines of the display. If no channels have been previously added to the bank,
the Primary Calling Channel (16) is displayed. Otherwise, up to six channel
numbers appear. A plus sign (+) at the end of the lower line indicates more
than six channels are stored in the bank. Press the
MEM
key again to
advance to the next page of channels. The memory channel bank can hold
all usable voice communication channels.
INT
ADD/DELETE
MEM CHANNEL
16
INT
ADD/DELETE
MEM CHANNEL
06 09 16
22 67 68 +
INT
ADD/DELETE
MEM CHANNEL
72 78
Memory Scan Bank Memory Scan Bank Memory Scan Bank
Default Page
Page Full
Next Page
•
Rotate the
SELECT/ENT
knob or microphone keys to select a desired channel
to add to the memory channel bank.
•
Press and hold the
MEM
key for about two seconds. The selected channel
is stored and the channel number appears in the memory channel bank.
Repeat the select and store process to add more preferred channels. As each
channel is added, the existing channels in the bank shift as necessary to
display the new channel number in the bank.
When in the normal communication mode, as channels are selected,
MEM
CHANNEL
appears in the second line of the display if the selected channel is
stored as a memory channel.
INT
16 PRI. HI
MEM CHANNEL
N 28 04.814
W 83 42.169
Memory Channel Display
To remove channels from the memory channel bank:
•
Press the
MEM
key. The Memory Scan channels appear in the display.
