Adjusting the RF gain
-Turn the knob clockwise to boost the reception of weak signals,
or counter-clockwise to reduce the reception of strong signals.
-In areas where strong signals cause noise and distortion,
reduce the RF gain (turn the knob counter-clockwise).
-In areas where weaker signals are difficult to hear, increase the
RF gain (turn the knob clockwise).
Using the Instant
Channel 19 feature
-Move the CH19 switch up; the radio automatically tunes to
channel 19 and disables the channel selector.
-Move the switch back down to return to the previous channel
and enable the channel selector.
Maintenance
Every six to twelve months, check to make sure that...
► The Standing Wave Ratio (SWR) is less than 2:1.
► All electrical connections are secure and free of corrosion.
► The antenna cable shows no wear or damage.
► All mounting screws are securely fastened.
TROUBLESHOOTING
If your radio is not performing to your expectations, please try these simple
steps.
Problem:
Things to try:
Radio won’t turn on (no
power)
1.
Check the radio’s power cord and all connections.
2.
Check the fuse in the radio’s power cord.
3.
Check your vehicle’s electrical system.
Poor reception
1.
Adjust the squelch level.
2.
Check the antenna, cable and connectors.
3.
Check operation mode of the radio.
Weak transmission
1.
Check the antenna, cable and connectors.
2.
Check the antenna grounding.
3.
Check for corrosion on the connectors.
Service and repair information
► Technical information, diagrams and charts will be provided upon request.
► Service, repair, or alignment should only be attempted by a qualified and/or
licensed radio technician.
► When ordering parts, it is important to specify the correct model number of this
radio.
P.8
Summary of Contents for Legend II
Page 1: ...Instruction Manual...
Page 9: ...P 9...
