M-tech LEGEND II PLUS, User Manual

Page: 12 / 28

• Choose an antenna that matches the specifications of this radio.
• Follow the manufacturer’s installation instructions carefully.
• Tune your antenna using a Standing-Wave Ratio (SWR) meter: set
the radio to channel 20, and adjust the antenna until the SWR is as
close as 1:1 as possible.
3.3 Power connection
Your LEGEND II PLUS is protected against an inversion of polarities. Your
equipment must be supplied with a continued current of 12 volts .
① Check that the battery is of 12 volts.
② Locate the positive and negative terminals of the battery ( ⊕ is red
and ⊖ is black).
③ It is necessary to connect your CB to a permanent ⊕ and ⊖ .
④ Connect the red wire ⊕ to the positive terminal of the battery and
the black ⊖ wire to the negative terminal of the battery.
⑤ Connect the power cable to your CB radio.
INSTALLATION
CAUTION!
NEVER Make sure the SWR is less than 2:1 before using the radio.
The SWR higher than 2:1 can damage the transmitter.
* Your dealer can help you select the antenna that is best for your needs. Consult
the specifications in the back of this manual for detailed transmitter and antenna
information.

WARNING!
NEVER replace the original fuse (3 Amp.) by one of a different value.
SECTION 3
10