8 |
Technical data
Warning
Detection Distance: 2m – 0.3m
Detection Accurate: < ±1cm
The best range: <0.9m
Operating Frequency: 40KHz
Voltage Range: 9-15V
Operating Temp.: -40°C to 85°C
Speaker: 80-100dB (at 30cm)
The parking sensor system is strictly a driver assistance device, it is not a substitute for driver
responsibility when driving a vehicle. You are obligated to check the rear surroundings of
your car before reversing or parking. The continous beep sound indicates an obstacle in
distance of 30 cm or less from your bumper. All sensors have to remain clean in order to
work properly. Water drops (e.g. washing, raining etc.), may decrease the sensitivity of the
sensor by 20% unless cleared and dry. Keep all the wires of the parking sensor from the high
temperature objects such as engine or exhaust. Any kind of ingerence in the parking sensor
system ( e.g. opening the control box or sensors) will result in the warranty loss.
Problem
Causes
Solution
System does not work on reverse. Bad connection of main power
lead. Bad jack connection.
Check the power lead.
Reconnect all jacks.
No indication when an obstacle
is detected.
Sensors detect ground.
Reset the system. Adjust angle
of the sensors.
Disposal of Old Electrical and Electronic Equipment (Applicable in the European Union)
The symbol indicates that this product shall not be mixed with unsorted municipal waste when
disposed of. There is a separate collection system fot waste electrical and electronic equip-
ment. For further information please contact the competent municipal authorities or the retailer
from which you purchased the product. Correct disposal ensures that waste electrical and elec-
tronic equipment is recycled and reused appropriately. It helps avoid potential damage to the
environment and human health and to preserve natural resources.
