Tinplate 1835/385 Locomotive
5
Maintenance
The engine should be well oiled and greased in order to run properly.
Regularly lubricate all axles and linkage components and pickup rollers to prevent
squeaking. Use light household oil, such as that found in M.T.H.'s
maintenance kit. Do not over oil. Use only a drop or two on each
pivot point.
DO NOT
OVER OIL
Grease Idler Gears (G)
Figure 3: Ilder Gear Grease Points
The locomotive utilizes a direct drive motor that should not need direct lubrication.
However, it will be necessary to lubricate the idler gears located on the inside of the drive
wheels as seen in Figure 6 with grease.
Periodically check the locomotive wheels and pickups for dirt and buildup, which can
cause poor electrical contact and
traction. Wheels can be cleaned using
denatured (not rubbing) alcohol applied
with a cotton swab.
To clean the track, use RailKing Track
Cleaning Fluid and a clean rag or
denatured (not rubbing) alcohol. Unplug
the transformer and wipe the rails of the
track, turning the rag frequently to
ensure that you are using clean cloth on
the rails. Thereafter, keep an eye on the
track and clean it when it gets dirty to
ensure good electrical contact.
Lubricating and Greasing Instructions
