M.T.H. premier M10000 Page 22 Operator'S Manual Download | Manualshive

Page: 22 / 26

background image

22 Premier M10000 Locomotive Set

(Additional equipment required)

While conventional mode operation of a Proto-Sound 2.0 engine yields wonderfully
realistic sound and several train control features, command mode operation allows the
user to access a world of command functions never before accessible to O Gauge
railroaders. With the addition of the DCS Remote Control System (including a DCS
remote handheld and Track Interface Unit) users gain many advanced features, including:

•

DCS Proto-Speed Control - Establishes desired locomotive speed in scale miles
per hour increments via a thumbwheel control and allows operator to set
maximum speed and acceleration/deceleration rates

•

ProtoSmoke® Variable Output Control - Controls how much smoke each engine
outputs and matches smoke to locomotive speed

•

Locomotive Lighting Control - Controls locomotive headlights, marker and
interior lights, beacon lights, ditch lights, and MARS lights

•

Emergency Stop-Single button push stops all Proto-Sound 2.0 trains but does not
turn off the power

•

One Touch Global Mute/UnMute-Single button mutes or unmutes all
DCS-controlled locomotives' user-defined actions, including sound, lights, and
smoke

•

Proto-Dispatch Operation-Public Address-like feature allows users to speak
through locomotive speaker during operation

•

Proto-Cast-Allows users to play audio recordings through locomotive speaker
during operation

•

Proto-Doppler Sound Effects Set Up-Users can configure locomotive for
Doppler Operation, including setting distance points for Doppler start, repeat,
and stop modes

•

Independent Volume Control of Engine Sounds, Bell, Horn & Whistle for each
Locomotive

•

Control up to 50 different DCS-Equipped Locomotives at one time with multiple
TIUs

•

Proto-Effects™ Set Up-User can select individual Proto-Effects™ operations to
be active or inactive, including cab chatter, train wreck sounds, coupler sounds,
and wheel clickety-clack sounds

•

Direction Control Set Up-User can set initial individual start-up direction (start
in forward or reverse) for double-heading operations

•

Locomotive Consist Set-up-User can determine locomotive values for consist
make-ups, allowing multiple locomotives belonging to a consist to operate
together

Additional Features Accessible With The DCS
Remote Control System

«
...
20
21
22
23
24
...
»

Summary of Contents for premier M10000



























Reviews:

No comments

Related manuals for premier M10000

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands