QUICK START GUIDE
Of course, you should read your manual over before running your Steam
Engine. But if you just can’t wait, choose how you want to run below and
enjoy! It is important to pay attention to which model you have purchased
and to make sure you are following the proper instructions for your Engine.
I USE A REGULAR DC SUPPLY…
Step 1: Unpack your engine (refer to unpacking instructions)
Step 2: Set the engine on the track
Step 3: Apply increasing DC voltage until she starts up and pulls out!
I'M A DCC/MOTOROLA OPERATOR…
Step 1: Unpack your engine (refer to unpacking instructions)
Step 2: Set the engine on the track
Step 3: Make sure the DCS/DCC selector switch is in the DCC position
(see Modes of Operation section for more detailed information)
Step 4: Power up your DCC system
Step 5: Select engine address 3 and press “F3” to start her up
Step 6: Turn the throttle and head on down the pike
I RUN DCS...
Step 1: Unpack your
(refer to unpacking instructions)
Step 2: Set the engine on the track
Step 3: Make sure the DCS/DCC selector switch is in the DCS position
(see Modes of Operation section for more detailed information)
Step 4: Power up your DCS system
Step 5: Add the engine to your system and start her up
Step 6: Turn the throttle and move out
engine
3
M.T.H. HO 4-6-2 K-4S Steam Engine
