22
MTH AEM-7 Operating Manual
on and off until ProtoSounds sounds two bell dings (signifying that the PFA
features have been turned off). Simply turn the transformer throttle OFF
and then ON again to lock
in the new setting. To reset
ProtoSounds® to its
original factory setting of
Squeaking Brakes and PFA
on, repeat the above
procedure but keep pressing
the whistle button in
Feature 28 until
ProtoSounds® only dings
once instead of twice.
ACTIVATING REMOTE LOCK-OUT CONTROL
ProtoSound® equipped engines feature a RESET setting that allows the
operator to remotely “lock” the engine into forward, neutral or reverse.
This is especially useful on layouts that feature “blocked” track sections.
The lockout feature comes from the factory in the OFF position, meaning it
is not active when you first take the engine out of the box. This is done to
prevent novice operators from accidentally locking their engine into
forward, neutral or reverse and then mistakenly thinking that the engine’s
electronics have failed. To activate the Remote Lockout Control setting, go
to RESET Feature 40 (See
the section entitled
Using
RESET To Program
ProtoSounds®
on page 17).
Once in Feature 40, press
the transformer whistle
button and wait for
ProtoSounds to sound a bell
ding. Continue pressing the
whistle button until
ProtoSounds sounds two
bell dings signifying that the Remote Lockout Control has been selected.
To lock in the setting, simply turn the throttle all the way off and then back
on again. To turn the Remote Lockout Control setting back off, go back to
Feature 40 and press the whistle button until only one bell ding sounds. To
lock in the setting, simply turn the transformer throttle off and then back on
again. Alternatively, you can go to RESET Feature 18 to reset all
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
28 Times
Listen For 5 Clank
And 3 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The PFA Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
40 Times
Listen For 8 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Lock-Out Setting
H
Summary of Contents for AEM-7
Page 35: ...35 MTH AEM 7 Operating Manual...
