SHSP
P. 4 / 4
EM-9308-A Rev.4
M-SYSTEM WARRANTY
M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such
product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System’s sole liability, and purchaser’s exclusive
remedies, under this warranty are, at M-System’s option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this
warranty. To submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original
sales invoice.
THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES OF ANY KIND WHATSOEVER.
M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: [email protected]
EXTERNAL DIMENSIONS
mm (inch)
LAN CABLE
• To Use STP (Shielded Twisted Pair) Cable
Use of STP cables will enhance the protection effect, but
you must be aware that the LAN cable will be automatically
grounded at both ends as its shield will be connected to the
ground through the FG terminal.
If interference by common mode noise is suspected, use UTP
(Unshielded Twisted Pair) cable.
SURGE PROTECTION
This unit’s surge protection is applicable only to the LAN
ports. If the power input and alarm contact output termi-
nals are connected to wires drawn from outside of the con-
trol panel, we recommend use of surge protectors for these
points, too.
Please contact M-System to select appropriate models.
MAINTENANCE
Confirm the unit’s status by referring to ‘Indicator Func-
tions’ table in Page 2 and replace it to a new one if neces-
sary.
130 (5.12)
8 (.31)
40 (1.57)
6.3 (.25)
124 (4.88)
7
6
5
4
3
2
1
7–M3
SCREW
[2 (.08)]
35.4 (1.39)
DIN RAIL
35mm wide
