![background image](http://html2.mh-extra.com/html/m-system/r5-series/r5-series_user-manual_3169459008.webp)
8
R5CON USERS MANUAL EM-9272 Rev.10
2.3 CONNECTING/DISCONNECTING THE COMMUNICATION LINE
■
CONNECTING
Connecting the R5 network module to the communication line.
Choose [Connect] from [Connect] on the menu bar and the COM Port Setting window pops up on the screen.
Confirm that the power is supplied to the R5 modules and that the configurator jack of the R5 network module and the COM
port of the PC is firmly connected with the attached cable.
Choose an appropriate COM port No. (COM1 through COM8) and click OK.
With the communication line established, the communication status lamp turns to green and the COM port No. is shown.
• ➔➔➔
■
DISCONNECTING
Choose [Disconnect] from [Connect] on the menu bar.