27
3. Maintenance.
Regular maintenance and cleaning of the device will guarantee its good and
fault-less operation, and extend its life. Attention should be paid to replacing grease
and carbon filters according to instructions.
3.1. Grease filter
a) replacement
The grease filter should be replaced at least
every two months during normal operation of the hood.
The filter can be dismantled by releasing its securing
studs (Fig. 5), keeping in mind that the filter has to be
protected with your hand during releasing the studs,
removing catches which secure the filters, then you can
replace the filter and reinstall the catches and the mesh.
Fig. 5.
3.2 Carbon.
a) operation
Carbon filters (C Fig. 5a) can absorb odours until they are saturated. They cannot be
washed or regenerated and should be replaced at
least every 2 months or more frequently in case of
very intensive use.
b) replacement
- remove masking cover A (Fig. 6) together with
grease filter B,
- replace carbon filter C situated on the textile filter B,
- install the grease filter with the carbon filter in the
hood.
Fig. 6
3.3 Lighting
The lighting system consists of 40 W power light bulb.
To replace a light bulb proceed as follows:
d)
remove the masking cover A from the hood body (see section 3.1 a)
e)
replace the bulb using a piece of cloth or paper for that purpose,
f)
install the masking cover A.
3.4 Cleaning
When cleaning your hood never use:
- solvents or alcohols which might dull lacquered surfaces
- caustic or abrasive substances, particularly for cleaning stainless steel surfaces
It is recommended to us moist cloth and liquid neutral cleaning agents.
