MFS2
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-1383 Rev.3 P. 2 / 4
INSTALLATION
Detach the yellow clamps located at the top and bottom of
the unit for separate the body from the base socket.
Clamp
(top & bottom)
DIN Rail
35mm wide
Spring Loaded
DIN Rail Adaptor
Shape and size of the base socket
are slightly different with various
socket types.
■
DIN RAIL MOUNTING
Set the base socket so that its
DIN rail adaptor is at the bot-
tom. Hang the upper hook at
the rear side of base socket on
the DIN rail and push in the
lower. When removing the
socket, push down the DIN
rail adaptor utilizing a minus
screwdriver and pull.
■
WALL MOUNTING
Refer to “EXTERNAL DI-
MENSIONS.”
TERMINAL CONNECTIONS
Connect the unit as in the diagram below or refer to the connection diagram on the side of the unit.
When an input resistor is provided with the module, attach it together with input wiring to the input screw terminals.
■
EXTERNAL DIMENSIONS unit: mm (inch)
80 (3.15)
72 (2.83)
109 (4.29)
139 (5.47)
[3.3 (.13)]
20 (.79)
CLAMP
(top & bottom)
DIN RAIL
35mm wide
• When mounting, no extra space is needed between units.
80 (3.15)
60 (2.36)
72 (2.83)
7.8 (.31)
2–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
14–M3.5
SCREW
12
5
6
14
11
1
10
15
4
3
2
7
9
8
■
CONNECTION DIAGRAM
*
Input shunt resistor attached for current input.
CONFIGURATOR
JACK
+
–
OUTPUT 3
9
15
+
–
OUTPUT 2
10
1
+
–
OUTPUT 1
11
2
+
–
OUTPUT 4
8
3
U(+)
V(–)
POWER
7
14
+
–
*
ANALOG INPUT
4
R
12
5
6
CONTACT INPUT
■
TERMINAL ASSIGNMENTS unit: mm (inch)
Input shunt resistor attached
for current input.
5
6
14
11
1
10
15
3
2
7
9
8
INPUT RESISTOR
(model: REM)
12 4
12 (.47)
