M5XSBS
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-2778 P. 3 / 4
EXTERNAL VIEWS
■
LEFT VIEW
■
FRONT VIEW
Output Setting
DIP SW
Input Setting
DIP SW
1
2
3
4
5
6
SW1
On
Power Indicator LED
Configurator Jack
1 2 3 4
SW2
On
■
RIGHT VIEW
OUTPUT RANGING
The internal DIP switch setting is required to select output types before setting a precise output range using PC Configurator
Software (model: M5CFG).
For detailed information on the PC configuration, refer to the M5CFG users manual.
Table 1. Input range
Input range
Input 1
Input 2
SW2-1
SW2-2
SW2-3
SW2-4
0 - 50 mA DC
ON
OFFF
ON
OFF
-1000 - +1000 mV DC
OFF
ON
OFF
ON
-10 - +10 V DC
OFF
OFF
OFF
OFF
Table 2. Output type
Output Type
SW1
1
2
3
4
5
6
0 – 20 mA
ON
OFF
OFF
OFF
ON
OFF
-5 – +5 V
OFF
ON
ON
OFF
OFF
ON
-10 – +10 V
OFF
ON
OFF
ON
OFF
ON
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) Check DIP switch setting.
3) Power input voltage: Check voltage across the terminal
7 – 8 with a multimeter.
4) Input: Check that the input signal is within 0 – 100% of
the full-scale.
5) Output: Check that the load resistance meets the de-
scribed specifications.
POWER INDICATOR LED
The transmitter is provided with a power indicator LED
which blinks in different patterns indicating various oper-
ating status.
The following figure indicates typical patterns.
LED ON OFF PATTERNS
TRANSMITTER STATUS
Downloading the setting
Range setting
Fine adjusting
Supplying a fixed output
Normal
Abnormal Operation
(corruption of configuration data)
80ms
