M1EAXV-1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6031-A Rev.1 P. 5 / 6
EXTERNAL VIEWS
Mode Button
Set Button
Display
Configurator Jack
Up Button
Down Button
COMPONENT
FUNCTION
Display
Indicates present values, setting values and abnormal information. Two types of present values at up-
per and lower are displayed by setting.
Mode button
Used to shift from measuring mode to each setting mode. The destination changes depending on how
long the button is held down. Used to return from each setting mode to measuring mode (press and
hold for 2 sec. or more).
Up button
Used to shift through setting parameters and to increase or select setting value.
Down button
Used to shift through setting parameters and to decrease or select setting value.
Set button
Used to change setting value of setting parameter. When at setting changeable state, used to enter
(save) the setting value. Used to move on through digits of setting value at setting changeable state.
Used to release latching alarm in measuring mode (press and hold for 2 sec. or more).
Configurator Jack
Used to configure with M1EA configurator software (model: M1EACFG). At the same time, set the
lockout setting of the unit to ‘lock’.
