210
DL30-G USERS MANUAL EM-8571-G Rev.2
4.3.2 Trend graph operation
Switching pages
Click [Page selector] to switch pages. There are 16 pages.
Changing maximum/minimum scale values
The maximum and minimum values of the scale range can be changed.
(1) Lock the screen.
(2) To change the maximum (minimum) value, click the area showing the maximum (minimum) value of the
scale. The [upper (lower) limit value setting] dialog is displayed.
(3) Enter a new value and click [OK] to apply the new value on the graph.
NOTES
• The modified scale values are valid only while the [Trend] view is displayed.
• The modifications can be cleared by [Reset calibration] command.
➔
1. Click to lock the screen
2. Click
(change the max. value)
2. Click
(change the min. value)
