48NAVD
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9440 Rev.6 P. 7 / 8
ADJUSTMENT PROCEDURE
L
SET
L
M
Increase / Decrease
L Setpoint
Complete
LL
SET
LL
M
Increase / Decrease
*
2
LL Setpoint
Complete
H
SET
H
M
Increase / Decrease
H Setpoint
Complete
HH
SET
HH
M
Increase / Decrease
*
2
HH Setpoint
Complete
LED OFF
LED OFF
LED Blinking
Mode Selector
*
1
UP / DOWN Button
LED Blinking
Mode Selector
*
1
■
ZERO ADJUSTMENT
: Apply 0% input signal before adjustment.
Z
SET
Z
M
Zero Adjustment
Complete
LED OFF
LED Blinking
Mode Selector
*
1
S
SET
S
M
Span Adjustment
Complete
■
SPAN ADJUSTMENT
: Apply 100% input signal before adjustment.
■
ALARM SETTING
: Proceed after the zero / span adjustments.
*
1. Keep pressing at least for 3 seconds to activate Mode Selector M. Press briefly for second and more times within 1 minute after it has been activated.
*
2. HH or LL setpoints are not provided for the 48NAVD-2.
Note: Each setting sequence is complete only when SET button is pressed. Once set, parameters are not lost even after the power is removed, except
for the power saving mode. The power saving mode is automatically cancelled when the power is reset.
•
SET
•
M
Indicator OFF
Complete
•
SET
•
M
Indicator ON
Complete
LED ON
LED OFF
LED Blinking
Mode Selector
*
1
■
POWER SAVING MODE
