47LV
P. 7 / 18
EM-9502-B Rev.3
■
OPERATIONS IN SETTING MODES
• Main display
The main display shows the current settings while the panel meter is in the setting mode.
• Shifting through setting parameters
In any setting mode, pressing Alarm/ button shifts one parameter to the next. Pressing Scale/
button shifts one to the
previous.
• Changing parameters
Pressing Shift button while one of the parameter settings is indicated on the display shifts the panel meter into the setting
standby mode. The digit to which you can apply changes starts blinking.
Press Up button to change the blinking value.
Press Shift button to go to the next digit.
Press Alarm/ or Scale/
button to apply the new value and go to the next or previous parameter setting.
• Invalid parameters
‘Max’ and ‘Min’ indicators start blinking when a parameter is within invalid range while setting. Return the setting within
the valid range or abort it by holding down Max/Min button for 1 second or more.
• Negative reading setting
The negative sign (–) must be set to the leftmost digit. For example, set ‘-080.0’ instead of ‘-80.0.’
• If you get lost...
Hold down Max/Min button for 1 second or more to return to the measuring mode without applying the last changes.
(Those which have been already applied by pressing Alarm/ or Scale/
button are not cancelled.)
