![background image](http://html2.mh-extra.com/html/m-system/47-series/47-series_operating-manual_3059829099.webp)
99
47DR OPERATING MANUAL EM-9509-B Rev.7
10.9 MAIN DISPLAY BLINKING AT ALARM
Main display blinking interval at alarm can be specified. The interval can be selected among those shown in the following
table.
■
BLINKING INTERVAL AT ALARM
MAIN DISPLAY
FUNCTION
DEFAULT VALUE
No blinking
Blinking in 1.0 second intervals
Blinking in 0.5 second intervals
Blinking in 0.3 second intervals
10.9.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Alarm/
↓
button for 3 seconds or more to move on
to Alarm Setting Mode.
• The alarm output pattern is indicated.
• The SD indicates ‘ALM PTN’.
NOTE
With the bank switching set to “enabled via the front button control”, the bank No. is indicated (‘ALM BNK’ on the SD).
2
Press Alarm/
↓
or Init/
↑
button to go to the main display blink-
ing at alarm setting.
• The main display blinking at alarm is indicated.
• The SD indicates ‘ALMBLNK’.
1,2,
4,5
2,4,
5
3
3