![background image](http://html2.mh-extra.com/html/m-system/47-series/47-series_operating-manual_3059829202.webp)
202
47DR OPERATING MANUAL EM-9509-B Rev.7
33.2 TRANSITION TIME TO LOCKOUT SETTING MODE
33.2.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the specifications and settings.
1
Hold down Alarm/
↓
and Init/
↑
buttons at once for 3 seconds or
more to move on to Advanced Setting Mode.
• The averaging type is indicated.
• The SD indicates ‘AVE-TP’.
NOTE
With the I/O option code ‘6’ or ‘A’, the event trigger mode is indicated (‘EVENT’ on the SD).
2
Press Alarm/
↓
or Init/
↑
button to go to the transition time to
Lockout Setting Mode setting.
• The transition time to Lockout Setting Mode is indicated.
• The SD indicates ‘PROTECT’.
3
Press Shift button to shift the display into the setting standby
mode. Then press Shift and Up buttons to set the transition
time to Lockout Setting Mode.
• The second digit starts blinking, to which you can apply changes.
• Set within the range of 00 to 99.
1,2,
4,5
1,2,
4,5
3
3
Blinking