MS-TestPro
User’s Manual
Page 12 of 113
2.3
Subsystems
Table 3 below describes the MS-
TestPro test device’s subsystems.
Table 3: MS-TestPro Subsystems
Subsystem
Description
Main unit
MS103TDs
•
Power supply, 48V, 0.5A, positive polarity central pin
•
USB 2.0 port
–
for memory stick connectivity
•
Ethernet connection for future use
•
HDMI pattern generator
Main unit
MS104B
•
Battery based
•
Charger, 12.6V, 3.0A, positive polarity central pin
•
USB 2.0 port
–
for memory stick connectivity
•
Ethernet connection for future use
•
HDMI pattern generator
HDBaseT Spec 1.0
Transmitter
module
•
HDBaseT Spec 1.0 output port
•
HDMI input, supporting pixel clock speed of up to 340 MHz (4K/60 Hz, 4:2:0)
•
PoE (PoH, powered device)
HDBaseT Spec 1.0
Receiver module
•
HDBaseT Spec 1.0 input port
•
HDMI output, supporting pixel clock speed of up to 340 MHz (4K/60 Hz, 4:2:0)
•
PoE (PoH, powered device)
HDBaseT Spec 2.0
Transmitter
module*
•
HDBaseT Spec 2.0 output port
•
HDMI input, supporting pixel clock speed of up to 340 MHz (4K/60 Hz, 4:2:0)
•
PoE (PoH, powered device)
HDBaseT Spec 2.0
Receiver module*
•
HDBaseT Spec 2.0 input port
•
HDMI output, supporting pixel clock speed of up to 340 MHz (4K/60 Hz, 4:2:0)
•
PoE (PoH, powered device)
DC Resistance
module*
•
RJ45 output port
HDMI Cable
Tester module*
•
HDMI output port
Looper*
•
RJ45 input port
•
HDMI input port
* Optional equipment
