MS-210SP USER GUIDE
03
|
www.m4sol.com
Introduction
The MSolutions MS-210SP is a 4K HDMI HDBaseT extender set allowing for uncompressed video
and audio to be extended up to 40m at 4K UHD & HDR (10.2Gbps), and 70m at 1080p or lower
resolutions.
S/PDIF audio return enables the sink to return audio to an audio amplification or distribution device
located remotely to the display. An additional one way analogue audio pass-through allows for a
separate audio signal to be returned from the receiver to the transmitter.
The extender provides bi-directional RS-232 and a single channel IR link between TX to RX, or RX
to TX. Bi-directional PoC (Power over Cable) allows for either the TX or RX to be powered.
Key Features
• Uncompressed extension of HDMI at resolutions up to 4K 60Hz 4:2:0 / 4K 30Hz 4:4:4 using
HDBaseT technology
• 4K signal extension to 40m over single CAT including HDR formats suppported under 10.2Gbps
• 1080p or lower video resolutions up to 70m over single CAT
• Supports HDMI pass-through all known HDMI audio formats including Dolby Atmos / DTS:X
• Bi-directional 12V PoC (Power over Cable)
• Bi-directional S/PDIF (Digital Optical Toslink) connectivity (TX to RX, RX to TX)
• Independent 1-way analogue audio pass-through (RX to TX)
• Bi-directional RS-232 serial pass through
• Single channel 5V IR pass-through (TX to RX, or, RX to TX)
• CEC (Consumer Electronics Control) pass through
• HDCP2.2 compliant
Video resolution capabilities - 10.2Gbps HDMI 1.4 specification max:
Resolution
Refresh
Chroma
Depth
4096x2160 (DCI)
3840x2160
50Hz / 60Hz
30Hz
24Hz
4:2:0
4:2:0 / 4:2:2 / 4:4:4 / RGB
4:2:0 / 4:2:2 / 4:4:4 / RGB
8-bit
8 / 10 / 12-bit
8 / 10 / 12-bit
1920x1080
up to 60Hz
4:4:4 / RGB
up to 16-bit
1280x720
1024x768
up to 60Hz
4:4:4 / RGB
up to 16-bit
VGA to WUXGA
up to 60Hz
