7 /
11
NOTE
◆
Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
◆
Rebuild connection when you replace the batteries of the remote controller.
A
ttach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT : Batteries not included. Refer to the Battery Information on the Page 1.
Remote Control Pairing
1.
Build connection
Press the connection button for 2 seconds, the status indicator flashes, then turn
on the power switch located on the vehicle dash, when the status indicator turns
off about 2 seconds and turns into long bright, means the connection successful.
If the status indicator makes no response, means the connection failed. Replace
the batteries and try again.
2.
Stop button
Press the button to stop the vehicle, press it again to release the brake.
3.
Speed select button
The switch poerates the vehicle to move in low, mormal or high speed.
HINT : This switch won
’
t work while your vehicle moves reverse.
WARNING !
◆
CHILDREN must not recharge the battery.
◆
This product contains Charging Protection meaning all functions of the car will
not work when charging.
◆
Always charge in an open area with adequate ventilation.
◆
Plug the charger port into the input socket(below the seat).
◆
Plug the charger plug into a wall outlet. The battery will begin charging.
◆
The indicator is red when charging, and turn to green when full charged.
