EC10•70 Technical Manual
EC10•70 Technical Manual
CHARACTERISTICS
The EuroLine series was specially developed for safes which have two thru holes,
100 mm apart. The plastic housing of the EuroLine Entry unit combines an alpha-
numeric membrane keypad with a large boltwork handle. The 8x8 mm square shaft
of the handle drives either the EM15•20 lock or a boltwork. This unit requires a
separate battery box. Battery terminals in the front of the keypad are provided in
case batteries are completely depleted. Cable length is approximately 30 cm.
DIMENSIONS / MOUNTING INSTRUCTION
Cut the 8 mm square shaft to an appropriate length. The shaft should stick out of the
boltwork 5-8 mm and is secured by using the star washer.
Note:
It is recommended
to deburr the shaft after cutting so it is easier to apply the star washer. If used with
the DirectDrive electronic lock, the shaft should engage approximately 15mm into the
lock. Affix the shaft in the handle with the provided screw and cover the screw with
the label.
star washer
Vlijtstraat 40, NL-7005 BN Doetinchem
Tel: +31 314 376 876 Fax: +31 314 376 878
www.m-locks.com / [email protected]
