REMOVING YOUR KINDLE:
THOROUGHLY DRY OFF GUARDIAN CASE BEFORE
REMOVING KINDLE.
Flip the Guardian Case over so the front is facing down and all four latches are visible .
Release each latch by placing your finger in the appropriate finger notch and
pulling each Tab upward .
Flip the Guardian Case back over and ensure all Latch-Locking Mechanisms are
detached from front .
Open the Guardian Case Front and remove Kindle .
CONTINUED:
STEPS AND PROCEDURES FOR PROPER CASE FUNCTION
SECTION II
O-RING CARE AND MAINTENANCE
• ONLY use mildly soapy water to clean .
• The O-ring is NOT Dishwasher safe .
• Do NOT store the O-ring in high temperatures or direct sunlight .
• Do NOT bend, twist, or distort shape of the O-ring . Stretching or augmenting
the O-ring could prevent its capability to form a water-tight seal .
• Make sure the O-ring is installed correctly before every use .
• Replace the O-ring after 1 year . Warranty on the O-ring is void after 1 year .
• Never remove the O-ring with a sharp object .
>
For replacement O-rings visit:
www.medgeaccessories.com
O-RING CHANNEL CARE AND MAINTENANCE
• Rinse in fresh, mildly soapy water after use and before storing . Never use bleach
or detergents .
• Do NOT store in direct sunlight or high temperatures .
• Keep free of obstruction . Check the O-ring Channel before every use . An obstructed
channel can prevent a water tight seal from forming .
• The O-ring Channel is not designed to withstand trauma from dropping . Do not use and
contact M-Edge customer service if you notice any chips or cracks .
STEPS AND PROCEDURES FOR PROPER O-RING FUNCTION
CONTINUED ON NEXT PAGE
