GB
ADV-F10 | ENGLISH
12
INNENSTATION
INDOOR STATION
BOÎTIER INTÉRIEUR
BINNENSTATION
Pairing / Training additional receivers
The included indoor station is already connected to the DECT power box,
so it is normally not necessary to carry out these steps.
A total of 3 indoor units can be programmed to one DECT power box.
Follow these steps for each indoor station in turn.
1. Hold the pairing button (18) on the DECT power box down for
approx. 5 seconds until the blue LED flashes.
2. Hold the pairing button (18) on the DECT indoor station for approx.
5 seconds and then release it.
3. The indoor unit has now been programmed.
TECHNICAL DATA
DECT power box
Supply voltage:
15 V DC
Power consumption:
approx. 170mA +-50mA
Temperature range:
-10°C to +50°C
Dimensions:
88x150x25
DECT indoor station
Supply voltage:
8 V DC
Power consumption:
approx. 170mA +- 50mA
Temperature range: -
10°C to +50°C
Dimensions:
88x200x22 mm
Frequency:
1.8GHz
Range (free field).
approx. 100m
NOTES
The functionality of the unit can be affected by the influence of strong
static, electrical or high frequency fields (discharging, mobile phones,
radios, microwaves).
Cleaning and maintenance
Always disconnect mains powered units from the mains supply before
cleaning (disconnect the plug). The unit housing can be cleaned using
a soapy soft cloth. Do not use any abrasive materials or chemicals.
Remove dust build-up from ventilation slits using a brush and clean up
using a vacuum cleaner. Do not hold the vacuum cleaner nozzle directly
against the unit.
SAFETY NOTES
The warranty will be null and void in case of damages arising from
violations of these operating instructions. We are not liable for
consequential damages!
We accept no liability for material damages or injuries arising from
inappropriate use or violation of the safety instructions. In such cases
all warranty claims are null and void!
Do not use this product in hospitals or other medical facilities. Although
this device transmits only relatively weak radio signals, the signals may
in such locations result in malfunctioning of systems critical to life. The
same may apply to other areas.
For reasons of safety and licensing (CE), unauthorised conversion and /
or modification of the product is prohibited.
Do not take the product apart!
Do not leave packaging material lying about since plastic foils and
pockets and polystyrene parts etc. could be lethal toys for children.
The device is suitable only for dry interior rooms (not bathrooms and
other moist places). Do not allow the device to get moist or wet.
Please consult a specialist should you have doubts regarding the
method of operation, the safety, or the connections of the device.
Handle the product with care – it is sensitive to bumps, knocks or falls
even from low heights.
2 YEAR LIMITED GUARANTEE
For two years after the date of purchase, the defect-free condition of
the product model and its materials is guaranteed. This guarantee is
only valid when the device is used as intended and is subject to regular
maintenance checks. The scope of this guarantee is limited to the
repair or reinstallation of any part of the device, and is only valid if no
unauthorised modifications or attempted repairs have been undertaken.
Customer statutory rights are not affected by this guarantee.
Please note!
No claim can be made under guarantee in the following circumstances:
• Operational malfunction
• Empty batteries or faulty accumulator
• Erroneous coding/channel selection
ADV-F10_I-Manual_210x240_fin7.indd 12
12.11.13 16:57