M-E AERCOM AC-210, Operating Instructions Manual

Page: 12 / 36

AERCOM | ENGLISH
12
AerCom wireless intercom system models:
AC-210
AC-220
AC-10 EX
Thank you for purchasing this wireless intercom system from m-e.
Please read these operating instructions carefully and retain the
instructions for any later use.
SCOPE OF DELIVERY
MODELL AC-210
1x Outdoor station
1x Power box
1x Indoor station
1x Charging cradle
1x Mains power supply for charging cradle
1x Mains power supply for power box
1x Mounting material
1x Assembly and operating instructions
1x Drilling template for outdoor station
MODELL AC-220
1x Outdoor station
1x Power box
2x Indoor station
2x Charging cradle
2x Mains power supply for charging cradle
1x Mains power supply for power box
1x Mounting material
1x Assembly and operating instructions
1x Drilling template for outdoor station
MODELL AC-10 EX
1x Indoor station
1x Charging cradle
1x Mains power supply for charging cradle
1x Mounting material
1x Assembly and operating instructions
KEY
1 Mobile indoor station
1.1 Power-LED
1.2 Loudspeaker
1.3 ON/OFF switch
1.4 Intercom button
1.5 Talk button
1.6 Door release button
1.7 LC display
1.8 Microphone
1.9 Charging contacts
1.10 Volume button
1.11 Reception indicator
1.12 Volume indicator
1.13 Storage battery indicator
1.14 Temperature indicator
2 Charging cradle
2.1 Power-LED
3 Power box
3.1 Power-LED
3.2 Loudspeaker
3.3 Loudspeaker contact
3.4 Ringer volume power box
3.5 Code button Family 1
3.6 Code button Family 2 (only on the 2-family version)
3.8 Ringer volume on outdoor station
3.9 Switch for door opener
3.10 Connection terminal
3.11 ON/OFF ringer on power box
3.12 ON/OFF ringer on outdoor station
3.13 Socket for 12 volt operating voltage
4 Outdoor station
4.1 Brightness sensor
4.2 Loudspeaker
4.3 Ringer button Family 1
4.4 Ringer button Family 2 (only on the 2-family version)
4.5 Casing screws
4.6 Microphone
ASSEMBLY
Please trial the system before final assembly and test whether there
is sufficient wireless range. To do this simply connect the mains power
supply to the power box and position the power box at approximately the
location where you plan the final assembly.