07
5. USE INSTRUCTIONS
1. The equipment is ready to use. It is only
necessary to fit the wheels. The wheel is
placed in the hole in the direction of the arrow
until the metal end of the wheel touches the
plastic end.
2. Connect the power, the unit will make two “beep” sounds and enter stan-
dby mode. Press the POWER button to turn on the machine. It will start up with
the following configuration:
Normal wind mode - Swing off - Cool off - Timer off - Medium speed (3
seconds) and then low speed - Ambient temperature on display. Press the
power button again to return to standby mode.
3. Press the SPEED button: the wind speed will change sequentially:
low-medium-high-quiet-low-medium-high-quiet ... etc
(note: silent speed can only be used within NORMAL MODE).
* Drying function: press SPEED for 3 seconds. The LED indicator will blink and
the equipment will run at high speed for 20 minutes after which the equipment
will enter standby mode. During the drying function, all other functions except
for POWER and LED will be disabled. If you want to stop the drying mode, press
the SPEED button again for 3 seconds.
4. The MODE button changes the wind mode of the equipment sequentially:
smart mode-natural mode-sleep mode-normal mode, etc.
Smart mode:
the device will adjust the speed automatically depending on the
ambient temperature: low speed ‹25ºC‹ medium speed ‹29ºC‹ high speed. The
smart mode is shown on the display with the led flashing.
Natural mode:
the device operates at the selected speed, but making variations
to imitate a natural air stream.
Sleep mode:
the device performs a programmed reduction of the operating
speed until it reaches low speed.
Low speed: keep running at low speed.
Medium speed: after 30 minutes at medium speed, go to low speed.
High speed: after 30 minutes in high speed, it goes to medium speed, and after
30 minutes it goes to low speed.
Normal mode:
the appliance operates at the selected speed.
