MAN465
Rev. 1.1
7
5
Basic Operation
5.1
Charging the VoltTab
Included with the
VoltTab
are two (2) chargers and two (2) charger cables. One is marked
“VoltTab” and the other marked “Tablet”. Neither of the chargers or cables should ever
be interchanged due to their charger capacities and cable connections being different.
To charge the tablet, insert the “Tablet” cable into the USB-C port at the bottom of the
tablet (Referencing #8 on Page 5). An LED will illuminate at the top of the tablet,
indicating charge status. RED indicates charge in progress and BLUE indicates charging is
complete. Note that if the tablet battery is fully discharged, it may take several minutes
for the RED charger indicator to appear.
Plug the “VoltTab” charge cable into the
VoltTab
USB port (Referencing #4 on Page 5).
The RED charge indicator (Referencing #5 on Page 5) should illuminate and will turn off
when charging is complete.
5.2
Turning on the VoltTab
Press and hold the power button at the bottom right corner of the tablet until the tablet
turns on (Referencing #7 on Page 4). At this point, the
VoltTab
is still powered off and
will be turned on when a
VoltTab
application is started.
5.3
Sleep Mode
To extend battery life, press the tablet power button once to turn the screen off and put
it in sleep mode. This is done when the
VoltTab
is
temporarily
not being used (traveling
between test sites, etc.).
5.4
Powering Off
To power the
VoltTab
off, press and hold the tablet power button until the power off
screen appears and tap “Power Off” to confirm. This should be done when the
VoltTab
is not being used (overnight, etc.). When the tablet powers down, the
VoltTab
will remain
active for several minutes and then power off automatically.
