Technical Specs
Studiophile SBX Specifications * :
•
Type :
Bass-reflex powered subwoofer
•
Woofer Driver :
8-inch mineral-filled polypropylene cone with high-temperature
voice coil and damped rubber surround
•
Frequency Response :
30Hz – 180 Hz
•
Low-Pass Filter :
Butterworth –12dB/octave <325Hz, -24dB/octave > 325Hz
•
Crossover Frequency :
Adjustable 50Hz - 180Hz
•
Input Sensitivity :
89dB
•
Amplifier Power :
100W @100Hz, 4 ohm, 0.1% THD
•
Dynamic Power :
120W
•
S/N Ratio :
> 100dB below full output, 100Hz
•
Input Connectors :
Two XLR balanced inputs; two TRS balanced/ unbalanced inputs
•
Output Connectors :
Two XLR balanced outputs for satellites, one XLR
balanced output for additional subwoofer
•
Controls: Level :
Phase; Subwoofer Frequency; Satellite Frequency
•
Switches :
Auto on/off; Satellite high-pass output bypass
•
Input Impedance :
20k ohms balanced, 10k ohms unbalanced
•
Input Sensitivity :
150mV input produces full output with volume control
at maximum
•
Protection :
Over temperature, turn-on/off transient, subsonic filter, external
mains fuse, ALC (avoid from hard clipping)
•
Indicator :
Power On (green) or Stand-by/Protection (Amber)
•
Power Requirements :
Dual-voltage (selectable by rear-panel switch) for
either 120V/~60Hz, 230V/~50Hz; powered via detachable 3-circuit line cord
•
Cabinet :
Vinyl-laminated MDF
•
Dimension :
15.6 in. (h) x 10.63 in. (w) x 12 in. (d)
•
Shipping Weight :
36 lbs.
*
Specifications subject to change without notice.
15
Summary of Contents for Studiophile SBX
Page 5: ...5 ...
Page 16: ...16 SBX 050604 ...
