9
6. After exiting Windows, follow the FIRST-TIME WINDOWS
DRIVER INSTALLATION to install the updated Portman dri-
ver.
Updating the Driver in Windows 95 & 98
If you are using Windows 95 and already have a Portman Windows
95 driver installed in your system, you will need to remove it before
updating it to the newest Portman driver. Follow these steps to
remove an older 95 driver from your system:
1. Start Windows as you usually do.
2. Open Settings/Control Panel/Multimedia/Advanced (In
Windows 98, “Devices”).
3. Select MIDI Devices and Instruments.
4. Check for a “Midiman Portman PC/S” entry. If none exists,
then the driver is not installed - discontinue this procedure and
follow the above FIRST-TIME WINDOWS DRIVER INSTALLA-
TION instead. If the entry exists, then double-click on it and
select Remove.
5. In order for Windows to completely remove the new driver,
you need to exit and restart Windows.
6. After exiting Windows, follow the WINDOWS 95 DRIVERIN-
STALLATION to install the updated Portman driver.
Cakewalk for Windows Installation
Once the Portman PC/S Windows driver is installed, Cakewalk for
Windows will require some set-up to take advantage of the
Portman MIDI interface. Under the Settings Menu, select MIDI
Devices. A “Midiman Portman PC/S” entry should be available
under both Input Devices and Output Devices. Select (highlight)
the Portman PC/S under both Input and Output. Then press the
OK button.
Once the MIDI Device is set to Portman, the Portman interface
becomes available as a selectable port in the Track/Measure win-
dow of each and every track.
