23
DAW and Preset Mode
Once you’ve set up your Oxygen keyboard to work with your DAW, it’s time to set the
keyboard’s operation Mode, Preset or DAW. By choosing the operation Mode, you can quickly
switch between the Oxygen controlling your DAW’s controls when DAW mode is active to
controlling a soft synth/Virtual Instrument when Preset mode is active.
These two operation Modes determine the function of the MIDI keyboard’s editable controls:
•
DAW:
In DAW Mode, the keyboard’s controls will be mapped to faders, buttons, knobs,
and in some cases pads in your DAW.
o
NC1:
Mackie 1: Will send standard Mackie messages. Mackie control is typically
used for DAWs like Cubase, Studio One, and Reaper.
o
NC2:
Mackie 2. Will send standard Mackie messages, but with higher resolution for
the pan pots. If your DAW's pan isn't able to do a full sweep of the pan pot, use
Mackie 2. Mackie control is typically used for DAWs like Cubase, Studio One, and
Reaper.
o
M|h:
Mackie/HUI will send standard Mackie/HUI messages for DAWs like Pro Tools
and Logic.
o
N1:
MIDI 1 will send 1 set of standard MIDI messages for use with Ableton.
o
N2:
MIDI 2 will send 1 set of standard MIDI messages for use with MPC Beats, and
Reason.
o
N3:
MIDI 3 will send 1 set of standard MIDI messages for use with Ableton for
controlling clip launching, and more advanced features.
•
Preset:
In Preset Mode, the keyboard’s controls will be mapped to faders, buttons,
knobs, and pads in your selected Virtual Instrument. The keyboard’s editable controls
can be set to functions that you design yourself. The following preset mappings can be
edited using the Oxygen Preset Editor and then saved to the keyboard’s internal memory
for you to load at a later time:
o
MPC PI
o
Hybrid 2
o
Mini Grand
o
Velvet
o
Xpand!2
o
Vacuum
o
BOOM
o
DB33
o
General MIDI
o
General MIDI
Summary of Contents for oxygen25
Page 1: ...User Guide English 2 31 Appendix English 32 34...
Page 35: ...35...
Page 36: ...m audio com Manual Version 1 0...
