84
Wheels
Editing Assignments
You can set the channel of each wheel. See
to learn how to do this.
To learn how to assign a MIDI CC message to a wheel, see the
section.
Channel
To set the MIDI channel for a wheel:
1.
Press
Edit
to enter Edit Mode. The
Edit
button will light up.
2.
Move the desired wheel.
PW
(pitch-bend wheel) or
MW
(modulation wheel) will appear in
the
display
.
3.
Press the
Chan Assign
key. The display will show
CHN
for 1 second and then show
PW
or
MW
and current MIDI channel or zone channel.
4.
Use the numeric keys (
0
–
9
) or
Preset Down
/
Up
(
) buttons to enter the desired MIDI
channel (
00
or
01
–
16
) or zone channel (
17
–
20
).
Note:
Values
00
and
01
–
16
correspond to Code 61’s global channel and the 16 available
MIDI channels. Values
17
–
20
correspond to channels used by
Zones 1
–
4
(
z1
–
z4
).
5.
Press the
Enter
key. The wheel will be assigned to that channel, and you will exit Edit
Mode.
To cancel your changes instead, press
Edit
. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
