27
Using the Bank Buttons
The faders, buttons, and encoders all have multiple banks. You can use the
Bank Right
/
Left
(
) buttons to move to the next or previous bank. You can set these buttons to change the
bank for all controls
or
for controls in a specific mode only.
The mode of the
Bank Right
/
Left
(
) buttons determines which controls it affects. Only the
controls that are in that same mode will change banks.
To change the Bank Right
/
Left
(
)
buttons’ mode,
press and hold
Shift
, and then press
one of the
Bank Right
/
Left
(
) buttons. Their current mode is distinguishable by their color
and the message shown in the
display
.
All Mode
(
white
,
ALL
)
Pressing the
Bank Right
/
Left
(
) buttons will change the bank for
all
controls
regardless of their modes.
When you press the
Bank Right
/
Left
(
) buttons, the current bank will appear in
the
display
as
A1
,
A2
,
A3
, or
A4
.
MIDI Mode
(
red
,
MIDI
)
Pressing
the
Bank
Right
/
Left
(
)
buttons
will
change
the
bank
for
all
controls
in
MIDI
Mode.
When you press the
Bank Right
/
Left
(
) buttons, the current bank will appear in
the
display
as
MIDI1
,
MIDI2
,
MIDI3
, or
MIDI4
.
Mackie Control
/
HUI Mode
(
green
,
MACHUI
)
Pressing the
Bank Right
/
Left
(
) buttons will change the bank for all controls in
Mackie Control/HUI Mode.
When you press the
Bank Right
/
Left
(
) buttons, only M/H will appear in the
display
, but you will still be moving to the next or previous bank (of 4 total).
HID Mode
(
yellow
,
HID
)
Pressing the
Bank Right
/
Left
(
) buttons will change the bank for all controls in
HID Mode.
When you press the
Bank Right
/
Left
(
) buttons, the current bank will appear in
the
display
as
H1
,
H2
,
H3
, or
H4
.
Note:
If you change the mode of the
faders
,
buttons
, or
encoders
, they will automatically be
in the bank that you most recently selected in that mode. For example, if the faders are in MIDI
Mode Bank
3
and the buttons are in HID Mode Bank
2
, the buttons will automatically be in
Bank
3
if you change them to MIDI Mode.