4
Features
Front Panel
1.
Subwoofer Driver:
Redesigned and
upgraded for the BX Subwoofer, the
transducer driver utilizes a 10" (25.4
cm) composite diaphragm and well
damped rubber surround, all driven
by a high-temperature voice coil. It is
designed to deliver a tight and
punchy low-frequency response (in
contrast to the "boomy" or "hyped"
response that is often characteristic
of underdamped subwoofers). The
driver's high Bl factor (electromagnet
force factor) creates a powerful motor
that allows the cone to follow the
input signal very accurately, resulting
in excellent low-frequency extension
and transient response.
2.
LED Indicator:
The
LED Indicator
lights up
blue
when the subwoofer is
powered on. When the
Subwoofer
Bypass
feature is engaged, the
LED
Indicator
will flash
red
to indicate
that no sound is coming out of the
subwoofer and that the full-
bandwidth signal is being routed to
the direct-field monitors. While in
Thermal Protection mode, the
LED
Indicator
will illuminate solid
red
,
and no audio will be heard from the
subwoofer.
Rear Panel
1.
AC Voltage Selector:
Set this
switch to the correct setting for your
location:
115 V
and
230 V
. Use the
115 V
setting for the USA and
Japan, or use the
230 V
setting for
most of the UK and Europe. Make
sure this switch is in the proper
position for your area before
attaching the power cable.
2.
Power Input:
Use a standard IEC
power cable (included) to connect
this input to a power outlet.
3.
Power Switch:
Use this switch to
turn the subwoofer on and off.
3
10
4
13
9
8
6
7
11
12
5
2
1
2
1
Summary of Contents for BX
Page 2: ......