M/A-Com P5100 Series Operator'S Manual Download Page 98

Page: 98 / 122

MM23772, Rev. F

The TX POWER menu item, when selected, toggles LOW/HIGH power. It does not use

to scroll nor is an additional press of the

button required.

Table 10-5: Menu Item Information

FEATURE

DISPLAY

PARAMETER

SETTING

COMMENT

Keypad Lock

Menu Item:
KEY LOCK
Once Selected:
LOCKED

Locked
Unlocked

Locks the keypad. To unlock; press and release “M” then within 1
second press the option button (

NOTE:

this sequence is also a

short cut to locking the keypad.)

Backlight Adjust

Menu Item:
BCK LIGHT
Once Selected:
BCKL=

OFF/ON

Selects the light level for backlighting.

Contrast Adjust

Menu Item:
CONTRAST
Once Selected:
CNTRST=

1, 2, 3, 4

Selects the display contrast level.

Transmit Power
Select

Menu Item:
TX POWER
Once Selected:
POWER=

HIGH or LOW

Selects radio output power mode.

Radio Revision
Information

Menu Item:
REVISION

N/A

Selects the information display to view. Informational display only
(see Table 10-6).

No user selectable settings.

Toggle Scan On/Off

SCAN

ON/OFF

Toggles Scan operation ON/OFF.

Toggle Private Mode PRIVATE

ON/OFF

Toggles Private Mode ON/OFF.

Display Current
Encryption Key

DISP KEY

N/A

Displays current encryption key. Informational display only.

selectable settings.

Display Current Home
Group/Channel

HOME

N/A

Selects Home Group/Channel.

Select Desired
System

SYS SEL

N/A

Selects a new system.

Add Group/Channel to
Scan List

SCAN ADD

N/A

Adds to Scan List.

Delete Group/Channel SCAN DEL

N/A

Deletes Group or Channel from Scan List.

Add/Delete Scan List SCAN A/D

N/A

Add or Delete from Scan List.

Talkaround TALKARND

ON/OFF

Conventional

Only. Toggles Talkaround feature ON/OFF.

Select Channel

CHN SEL

N/A

Conventional Only.

Feature Encryption
Display

Menu Item:
FEATURES

N/A

Indicates current features programmed into the radio as well as
certain information required to add features to the radio.

Informational display only. No user selectable settings.

Summary of Contents for P5100 Series



























































































































Search results

Summary of Contents for P5100 Series

Reviews:

Related manuals for P5100 Series

Brands by name

Popular brands

M/A-Com P5100 Series, Operator'S Manual

Search results

Summary of Contents for P5100 Series

Reviews:

Related manuals for P5100 Series

Brands by name

Popular brands