M/A-Com P5100 Series, Installation And Operator'S Manual, Page: 11 / 22

4. DESCRIPTION
D3100 comes ready to connect into a system with a personality containing
two systems. The power-on default system is an EDACS Data System named
“Site” containing an EDACS Control Channel (806.075 TX/851.075 RX) and
an EDACS Working Channel (820.975 TX/865.975 RX). The second system
is named “851” and is a conventional system for use in parametric testing and
calibration, should it be required.
LEDS
Figure 4-1: D3100 Front View
ANTENNA
CONNECTOR
POWER CABLE DATA CABLE
Figure 4-2: D3100 Rear View
10