M/A-Com P5100 Series, Maintenance Manual

Page: 4 / 38

SPECIFICATIONS
1.0 SPECIFICATIONS
1
OUTPUT VOLTAGE
Transmit and Receive Simultaneously 26.0 VDC
±
1.0 VDC @ 15 Amps (F801A)
13.0VDC
±
0.5VDC @ 3Amps (J801)
Receive only Less than 16VDC @ 3 Amps (J801)
INPUT VOLTAGE
121 VAC
±
20% (60 Hz version)
230 VAC
±
15% (50 Hz version)
220VAC ±15% (60 Hz version)
INPUT FREQUENCY 60 Hz
±
2 Hz (60 Hz version)
50 Hz
±
2 Hz (50 Hz version)
NOTE: For every + 1.0% change in the input frequency, the output voltage will not vary
more than + 1.6% from the output voltage measured at the nominal input line frequency.
INPUT LINE SURGE PROTECTION 150 V rated MOV (60 Hz version)
275 V rated MOV (50 Hz version)
DUTY CYCLE ( For 0-18 Amp Output) 100% (Continuous Duty)
OUTPUT VOLTAGE RIPPLE Less than 100 mVp-p @ 25°C
Less than 200
mVp-p @ -30°C
OUTPUT TRANSIENT RESPONSE
Overshoot Not to exceed 30 Volts (F801A)
Undershoot Not less than 22 Volts (F801A)
EFFICIENCY 70% @ rated TX/RX load current and nominal
line
voltage
FUSE CAPABILITY
Input 10 Amp (60 Hz version)
(2) 5 Amp (50 Hz version)
Output 5 Amp (Low Current Port)
20 Amp High Current Port)
DIMENSIONS (HxWxD) 5.25" x 19" x 10.35"
WEIGHT 45 lbs.
OPERATING ENVIRONMENT -30°C To + 60°C
1
These specifications are intended primarily for the use of the service personnel.
LBI-38551D 4