34
STEP 4 – MOUNT CONTROL UNIT AND RADIO
Control Unit Mounting (Remote Applications Only)
1. Use the bracket as a template and mark and drill the mounting holes. Be
sure to leave enough room at the rear of the control unit for the cable
connector. Refer to Figure 30 for control unit mounting bracket
installation.
2. Secure the mounting bracket using the four No. 10 x 3/4 self-tapping
screws supplied. (Use No. 10 x 1 ½ if needed.)
3. Secure the control unit to the bracket with the two 1/4-20 x 5/8 hex head
screws and lock washers provided.
Top
Mount
Bottom
Mount
Figure 30: Control Unit Mounting Brackets
Pigtail Bracket
The Pigtail Bracket mounts the DB15 connector for easier user access. The
DB15 connector facilitates radio programming and keyloading by the
customer without the need to dismantle the radio or Control Unit. There are
two Pigtail brackets, one for use with the Control Unit and one for use with
the radio-mounting bracket. This section includes procedures to mount the
Pigtail Brackets in each of these configurations.
Control Unit Mounting
For Control Unit mounting, attach the pigtail bracket to the side of the Control
Unit bracket using existing mounting bracket hardware. The Pigtail Bracket
can be mounted to the left or right side of the Control Unit. Hardware Kit,
KT101533V6, contains Pigtail mounting bracket and hardware required to
attach Pigtail to bracket.
Summary of Contents for Orion
