IMPORTANT:
Never climb the HIPOD LLWP until you have checked the following:
•
The ladder is secure and positioned correctly.
•
The platform is secure and positioned correctly.
•
All Casters / base plates are positioned correctly.
•
All locks to folding gate and casters are applied.
Ensure all caster wheels are locked before use and pointing outwards.
Using the ladder section climb onto the platform of the workstation.
Push the sprung saloon gate when entering the platform.
The sprung saloon gate will self-close when on the work platform.
Ensure saloon gate has closed before any work.
www.lyteladders.co.uk
Tel:
01792 796666
Email:
7.
8.
Altering the platform height on the HIPOD LLWP:
1. Release locking clips from the front and rear tubes
2. Position platform at the lower level ensure claws are positioned over the front and rear tube
3. Lock platform retaining clips
HIPOD optional extra
Toeboard fi tting
1. Stand 1 x long toeboard section with link clamp facing down
and 1 x short toeboard section with link clam facing up
2. Slide long toeboard link clamp down onto upward facing link clamp
on short toeboard. Ensure two boards are fi rmly linked
3. Repeat step 1 and 2 until all 4 toeboard sections are in place
Caster, Base Plate, and Adjustable leg Fitting
1. Remove the leg fi tting by pulling fi rmly to discharge the spring tension
2. Replace the other leg fi tting by pushing the top into the empty podium leg depressing the captive spring.
The spring fi tting at the top will keep the legs retained in the tube in all normal usage and prevent the legs from falling out
HP
005
I
nstruc
tion
Lyte_HiPod_Instruction_Leaflet.indd 4
Lyte_HiPod_Instruction_Leaflet.indd 4
16/12/2013 11:11:25
16/12/2013 11:11:25
