Channel 8 ( logo 1 ) :
The channel 8 has 2 functions:
-
Strobe: the logo will flash. The speed of flash depends on the position of the potentiometer (more the logo flash quickly, more points
forming the logo are showed).
-
Dotted line mode: The logo is displayed in dotted line. The size of dotted lines depends on the position of the potentiometer.
-
Note: To visualize it the dotted linemode, you must position the channel 1 on the dotting mode 1
Channel 9 :
The channel 9 is used for the rotation PAN. The angle of rotation depends on the position of the potentiometer.
Channel 10 :
The channel 10 is used for the rotation TILT. The angle of rotation depends on the position of the potentiometer.
Channel 11 :
The channel 11 is used to adjust the precision of the movements PAN and TILT. More the value of the potentiometer is high, more the
regulating of the movements PAN and TILT will be precise.
Channel 12 ( logo 2 ) :
The channel 9 has 5 functions :
-
Stop : On the lowest position of the potentiometer, the SAMOURAÏ 200 is in blackout. It means that the SAMOURAÏ 200 projects no
logo and the laser beam is off.
-
Start 1 : The following step, SAMOURAÏ 200 lights the laser beam and display a logo.
-
Dotting mode 1 : The logo cill displayed in point.
-
Start 2 : The following step, SAMOURAÏ 200 lights the laser beam and display a logo. The internal software being common to several
devices (ex: Nippon 120), this mode don't work in the SAMOURAI 200
-
Dotting mode 2 : The logo cill displayed in point. The internal software being common to several devices (ex: Nippon 120), this mode
don't work in the SAMOURAI 200
Channel 13 ( logo 2 ) :
The channel 13 has only one function : it permits you to select the logo that you want to display. You have the choise between 256 logos.
Note: some logos that follow can form themselves a character's movement like a bird fly or running man, other logos are texts like 0, 1, 2, 3...
Channel 14 ( logo 2 ):
The channel 14 has 2 functions:
-
Gobo angle : You can determine the angle of display of the logo. The angle depends on the position of the potentiometer.
-
Unclockwise rotate : you can launch the rotation of the gobo (on itself) unclockwise. The speed of rotation depends on the position of
the potentiometer.
Channel 15 ( logo 2 ):
The channel 15 has 2 functions:
-
Left-right zoom : You can adjust the X proportion of the logo (adjustment of 1 to -1). It means that the logo is going to flatten vertically
until the motive is a line (adjustment 0) and can re-establish the logo but reversed vertically (adjustment -1). The adjustment depends
on the position of the potentiometer
-
Left-right roll : You can launch a sequence that will modify the X proportion of the motive progressively. This sequence can make a
rotation according to the vertical axis of the logo. The speed of rotation depends on the position of the potentiometer.
Channel 16 ( logo 2 ):
The channel 16 has 2 functions :
-
Up-down zoom : You can adjust the proportion of the logo (adjustment of 1 to -1). It means that the logo is going to flatten horizontally
until the logo is a line (adjustment 0) and can re-establish the logo but reversed horizontally (adjustment -1). The adjustment depends
on the position of the potentiometer
-
Up-Down roll : You can launch a sequence that will modify the proportion progressively of the logo. This sequence can make a
rotation according to the horizontal axis of the logo. The speed of rotation depends on the position of the potentiometer
Channel 17 ( logo 2 ):
The channel 17 has 2 functions:
-
Horizontal transfer: You can make a horizontal transfer of the logo. At the start, the logo moves to the right then rebounds to come
back to the left (but reversed). When it arrives completely on the left, it leaves to the right. The speed of transfer depends on the
position of the potentiometer
-
Vertical transfer : You can make a vertical transfer of the logo. At the start, the logo moves to the up then rebounds to come back to
the down (but reversed). When it arrives completely on the left, it leaves to the upt . The speed of transfer depends on the position of
the potentiometer.
Channel 18 ( logo 2 ) :
The channel 18 has 1 function:
-
Automatic human writing (speed drax): you can launch an automatic sequence simulating the writing human of the logo. The speed of
writing depends on the position of the potentiometer.
Channel 19 ( logo 2 ) :
The channel 19 has 2 functions:
-
Strobe: the logo will flash. The speed of flash depends on the position of the potentiometer (more the logo flash quickly, more points
forming the logo are showed).
-
Dotted line mode: The logo is displayed in dotted line. The size of dotted lines depends on the position of the potentiometer.
Note: To visualize it the dotted linemode, you must position the channel 12 on the dotting mode 1
Channel 20 ( logo 2 ) :
The channel 20 is used to adjust the size of the logo 2. The size of the logo depends on the position of the potentiometer.