c) tighten the unscrewed hinges again one hole fur-
ther
d) tighten the upper beam with a butterfly nut or M8
knob (supplied)
2. Electric drive unit installation
a) match the adaptor to the honey extractor's basket
axle and assemble it in the drive (two lengths of
drives are included)
b) install and tighten the motor and transmission
casing
c) install and tighten the controller unit
d) connect the power cord
2.3 Technical specifications
-power rating: 80 W
-supply voltage: 230 V
3. Storage
Clean and dry the unit thoroughly after use. Store the
device in a dry and frost-free room. An additional
technical check should be carried out periodically,
and if any defects are found, please contact the
manufacturer.
