•
Advanced diagnostic and controlling functions , they
monitor operating parameters for the controller any
equipment attached.
•
Cooperation with a top-class vector converter made
by Mitsubishi.
ADDITIONAL OPTIONS FOR HONEY EXTRACTORS:
•
HEATED DRUM
•
HEATED BOTTOM
6. Manual for the controllers in the honey
extractors with bottom drives
6.1. Manual to handle semi-automatic controlling
Fig. 1
Prior to plugging the honey extractor to the mains, make
sure if “0/1” switch on the controller casing is in “0” position .
Semi-automatic controlling
(inverter)
-
Honey extractor with this type of controlling has an
automatic and manual operating mode
.
AUTOMATIC PROGRAMME:
The controller has one automatic programme, factory-set.
Starting the automatic mode occurs when two side buttons
are pressed at the same time, as in
Fig. 2
Fig. 2. Starting the automatic mode
MANUAL PROGRAMME:
Prior to starting work with manual mode, set the knob
(speed regulator) in position
„min”
as in
Fig. 3
Fig.3. Knob (speed regulator)
By pressing the button
– arrow left - (
Fig. 4
) or arrow-right
(
Fig. 5
) we start the extractor basket. By means of a knob
(speed regulator) we increase the basket rotational speed.
Fig.4. Basket rotation to the left
Fig.5. Basket rotation to the right
In order to change the rotation direction, press
„STOP”
Fig.6. „STOP” stopping the basket
And we select the rotation direction by means of the buttons
shown in
Fig. 4 and Fig.5