•
Setting the clock
Having entered the PIN code correctly, the current date and time can be set. For this purpose, the four
buttons located under the screen must be used
Screen:
Blinking letter T means the initial position of the cursor.
In the first line: letter T, TIME
In the second line: date and time to be set
Buttons:
SELECT
: moving from the screen intended for setting the device identification number. The button
remains inactive as the cursor is not set for initial position by the ENTER button.
MINUS
: Lowering the value of the number to be entered.
PLUS
: Increasing the value of the number to be entered.
ENTER
: moving the blinking cursor to the space where the value is to be changed.
ATTENTION: in the WORK mode the local time may be corrected automatically to the GSM
network operator time. The correction shall occur when the discrepancy between the local time and the
operator’s time exceeds ± 1 h 5 min
•
Setting up the device identification number
Setting up the scales identification number remains a subsequent step. The identification number is set
up by a user in order to mark the scales at their discretion. The identification number is texted in a
message in order to distinguish between the scales in case many of them are used at the same time.
Screen:
Blinking letter D means the cursor initial position.
The first line: letter D, SCALES ID
The second line: the identification number in the form XXXXXX
Buttons:
SELECT
: moving to the screen for setting a user’s telephone number. The button remains inactive, as
the cursor is not set to the initial position by the ENTER button.
MINUS
: lowering the value of the digit to be entered.
PLUS
: increasing the value of the digit to be entered.
ENTER
: moving a blinking cursor to the space where the value is currently being changed.
•
Setting the number for SMS
Summary of Contents for GBS-2 Optima
Page 9: ......
