08/09/2020
NanoVNA User Guide | NanoVNA User Guide
https://cho45.github.io/NanoVNA-manual/#7-
トレース状態
11/51
Drag the marker on the touch panel
Press and hold LR on the lever switch
4. Calibration status
The data number of the calibration being read and the error correction applied are displayed.
C0
C1
C2
C3
C4
: Each indicates that the corresponding number of calibration data is loaded.
c0
c1
c2
c3
c4
: Each shows that the corresponding number of calibration data has been loaded, but the frequency range
has changed after loading and indicates that compensation is being used for error correction.
D
: directivity Indicates that error correction is applied
R
: refrection tracking Indicates that error correction is applied
S
: source match Indicates that error correction is applied
T
: transmission tracking Indicates that error correction is applied
X
: isolation (crosstalk) indicates that error correction is applied
5. Reference position
Indicates the reference position of the corresponding trace.
DISPLAY
SCALE
REFERENCE POSITION
You can change the position with.
6. Marker status
You will see the active marker selected and one previously active marker.
7. Trace status
The status of each trace format and the value corresponding to the active marker are displayed.
For example
CH0 LOGMAG 10dB/ 0.02dB
, read as follows.
