Page 2 of 4
An inadequate, incomplete, or inexistent install procedure may lead to the
incorrect operation of the equipment and/or the incorrect information being supplied
to the end-user.
Purpose
This document is provided to instruct a customer to install the Lynxspring 10”
Touchscreen Display in as timely a fashion as possible.
Scope
This document is intended for use by any competent person, with minimal IT skills
required. Do not attempt to install this product if you do not have the relevant skills &
experience to do so.
Procedure
The Tablet can be powered using the supplied Standard Wall Socket power supply.
A wall socket will be required for the Switching Adaptor Input at 100-240V at 50/60Hz.
The supplied USB cable to DC Jack is 1M long, ensure the cable will reach the power
supply.
An Ethernet cable will be required if a wired network connection is used.
Mounting Options
On the rear Bezel, mounting hole alignments can be found for a standard VESA mount
and electrical pattress box fixings.
NOTE: Hardware fixings to the wall or panel are not supplied with this kit due to the
variation of material types and thickness. Please use screws/bolts that are appropriate
for the surroundings.
An inadequate or incomplete install procedure may lead to the incorrect
operation of the equipment and/or the incorrect information being supplied to
the end user. Do not attempt to install this product if you do not have the
relevant skills & experience to do so.
