JO-PC1 Base Controller Mounting and Wiring Guide
Updated: January 16, 2012
Part Number JO-PC1 rev 1
Related Documentation
Battery Precautions
4
Battery Precautions
Caution
•
The NiMH battery used in this device may present a risk of fire or chemical burn if mistreated.
Do not disassemble, heat above 122ºF (50ºC), or incinerate. Replace battery pack with type
JENE-PC-BPPM only. Use of another battery may present a risk of fire or explosion.
•
Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.
WEEE (Waste of Electrical and Electronic Equipment)
Recycling of Electronic Products:
(International Installations)
In 2006 the European Union adopted regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. It is no longer allowable to simply throw away such equipment. Instead, these products
must enter the recycling process. To properly dispose of this product, please take it to a local recycling center.
If a local recycling center cannot be found, please return it to one of these offices:
Related Documentation
For more details on configuring and using the JO-PC1 controller, consult the following documents:
•
JENE NiagaraAX Install and Startup Guide
•
JO-16 Installation and Configuration Guide
•
JO-34 Installation and Configuration Guide
•
Various option card installation documents, such as:
–
JENE-PC-LONCARD Option Install Sheet
section on page 8 for a listing of option card types.
•
NiagaraAX Ndio Guide
•
NiagaraAX User Guide
Lynxspring, Inc.
1210 NE Windsor Drive
Lee’s Summit, MO 64086
