7
ENGLISH
Troubleshooting
Type of fault
Action
MiniVib is not working. • Check that MiniVib is on and that the battery is
charged (see p 3).
• Check that the transmitters are working (see
transmitter user manual).
• Check that MiniVib and the transmitters are set
to the same channel (see p 6).
• Check that Night mode is not switched on (see p 5).
• The distance from the transmitter may be too
great. Move the transmitter nearer or extend the
system with one or more repeaters (see p 2).
• If the Alarm Call is replaced by another alarm,
e.g. Lynx Baby Alarm, check that the transmitter
alarm symbol is set to alarm call (see transmitter
user manual).
The operating time is
less than two days.
• Contact the place of purchase to exchange the
battery.
Cleaning and maintenance
Use a damp cloth to wipe MiniVib on the outside. Never use cleaning products
or solvents. From time to time check that the cables and connections are intact.
If there is any leakage from the battery: scrap the battery and clean the battery
plates (positive and negative) on MiniVib with a cotton bud and a little
alcohol and carefully scrape off any residue from other surfaces with the end
of a matchstick.
Repairs
If your product malfunctions, it must be repaired by a qualified technician.
Do not attempt to open the case of the device since this would invalidate the
warranty. If your product requires service, please contact your hearing care profes-
sional for assistance.
Waste disposal
This product contains electrical or electronic equipment and should be
disposed of carefully in the interests of your safety and the environ-
ment. Please contact your local hearing care professional concerning
disposal of the product. Used batteries should be taken to the nearest
recycling point in your district.
Summary of Contents for MiniVib
Page 51: ......
