14
CARE AND USE/INSTALLATION
OBTAINING SERVICE
If Service is Required
Before You Call for Service
For Your Records
Date of Purchase
Dealer’s name
Dealer’s Address
Dealer’s City
Dealer’s State
Dealer’s Zip Code
Appliance Serial Number
Rev. Letter
Appliance Service/Model Number
Date Warranty Card Sent (Must be
within 10 days of purchase).
Table A
•
If the product is within the first year warranty period
please contact your dealer or call Lynx Grills Customer
Service at 888.289.5969 for directions on how to obtain
warranty coverage in your area.
•
If the product is outside the first year warranty period,
Lynx Grills Customer Service can provide recommen-
dations of service centers in your area.
•
In all correspondence regarding service, be sure to give
the service/model number, serial number, and proof of
purchase.
•
Try to have information or description of nature of the
problem, how long the appliance has been running, the
room temperature, and any additional information that
may be helpful in quickly solving the problem.
•
Table A is provided for recording pertinent information
regarding your product for future reference.
• Never attempt to repair or perform maintenance on
the appliance until the main electrical power has been
disconnected. Turning the appliance control "OFF"
does not remove electrical power from the units wiring.
• Replace all parts and panels before operating.
!
WARNING
Electrocution Hazard
If the appliance appears to be malfunctioning, read through
this manual first. If the problem persists, check the trouble
-
shooting guide below. Locate the problem in the guide and
refer to the cause and its remedy before calling for service.
The problem may be something very simple that can be
solved without a service call. However, it may be required
to contact your dealer or a qualified service technician.
!
CAUTION
In the unlikely event you lose cooling in your unit,
do not
unplug the product from the electric supply
, but do call
a qualified service technician immediately. It is possible
that the loss of cooling capacity is a result of excessive
frost build-up on the evaporator cooling coil. In this case,
removing power to the unit will result in the melting of this
excessive quantity of ice, which could generate melt water
that exceeds the capacity of the defrost drain system and
could result in water damage to your home. The end-user
will be ultimately responsible for any water damage caused
by prematurely turning the unit off without appropriately
managing the excess water run-off.