8
|
LEH CARE & USE/INSTALLATION
MODEL
WATTS
MOUNTING HEIGHT
AVERAGE
COLD
PROTECTED
LEH39
4,000
8' - 12' (2.4m - 3.7m)
8' x 10' (2.4m x 3.0m)
6' x 8' (1.8m x 2.4m) 10' x 12' (3.0m x 3.7m)
LEH61
6,000 10' - 14' (3.0m - 4.3m)
11' x 11' (3.4m x 3.4m)
10' x 10' (3.0m x 3.0m) 12' x 12' (3.7m x 3.7m)
• LYNX QUARTZ TUBE ELECTRIC HEATERS are furnished with wall/ceiling mount swivel brackets. These brackets
may be discarded when the heater is hung with chains, special bracketing, or used in conjunction with our flush
mount frame.
• See sales literature and price list for full listing of models, descriptions, amperages, and voltages. At times,
especially when the mounting height might be quite low, an increased number of smaller heaters can help prevent
overheating.
• Dual Element Heaters can be wired with our Duplex/Stack Switch (provided see pg.5) which enables the ability to
turn on and off each element independently, providing for half power/full power capabilities.
• For ideal comfort heat, the best solution is to heat from two sides rather than from just one side. However, there are
times when this is not practical.
• Coverage areas are approximate dimensions and will vary depending on prevailing and personal comfort levels.
• Indoor or well-protected environments will generally exceed average (see charts). Heaters can provide less than
average coverage in extremely cold/windy conditions.
• Before performing any maintenance, power must be disconnected and the heater cool to touch.
• Heater housing, reflectors, and heating element can be rinsed with a hose or wiped down with isopropyl
alcohol, acetone, or glass cleaner. Use a clean, scratch-free rag or paper towel. Any oxidation, surface rust, or
discoloration can be removed with a stainless steel cleaner or metal polish on the bare metal surface.
• Make sure all water, solvents, or cleaners are removed and the heater is dry before reconnecting the power.
NOTE: Mounting height should not be less than 6' (1.8m) if the heater is labeled as UL Listed and 8' (2.4m) if the
heater is labeled as CUL Listed. Indoor or well-protected environments will generally exceed average.
Heaters can provide less than average coverage in extremely cold/windy conditions.
HEATER COVERAGE AREAS
DUAL ELEMENT AREAS COVERED (FEET)
MAINTENANCE INSTRUCTIONS
GENERAL NOTES
